Products

Healing Cap Compatible with Straumann® RC/NC is a Ø4.6 mm temporary protective cap for clinicians working with RC or NC restorative connections. It closes the interface during the healing interval and preserves access for the following prosthetic step.Made from Titanium Grade 5, the cap...

Implant Lab Analog Compatible with ADIN® OS gives dental technicians an implant-level reference inside a conventional stone model. The Ø3.75 mm analog is selected after an implant-level impression to reproduce the connection for crown, abutment or bridge fabrication.Its Titanium Grade 5 body provides a...

Implant Lab Analog Compatible with BB® Implants transfers the selected implant connection into a laboratory model for prosthetic fabrication. Technicians can choose Mini Ø3.0 mm or Regular Ø4.0 mm to match the clinical platform before pouring the working model.The Titanium Grade 5 analog creates...

Implant Lab Analog Compatible with BEGO® Implants reproduces the implant position and connection in a conventional dental model. Four diameters—Ø3.75, Ø4.1, Ø4.5 and Ø5.5 mm—let technicians select the analog that corresponds to the recorded clinical platform.Machined from Titanium Grade 5, it serves as the...

Implant Lab Analog Compatible with BioHorizons® Implants is a BH-30 laboratory component for reproducing an implant-level connection in a conventional working model. It gives technicians a fixed reference for designing and evaluating an implant-supported restoration outside the mouth.The analog is manufactured from Titanium Grade...

Implant Lab Analog Compatible with Cortex Implants is a Ø3.75 mm model analog used by dental laboratories after an implant-level impression. Embedded in the working cast, it represents the clinical connection and gives the technician a reference for restorative orientation.The Titanium Grade 5 component...

Implant Lab Analog Compatible with Dentium Implants reproduces the Regular Ø4.5 mm connection in a laboratory cast after implant-level impression transfer. It helps technicians preserve the recorded position and orientation while fabricating a crown, abutment or implant-supported bridge.Made from Titanium Grade 5, the analog...

Implant Lab Analog Compatible with DIO® UFII reproduces the implant-level connection in a conventional laboratory model. Dental technicians can select Mini Ø3.5 mm or Regular Ø4.5 mm to match the clinical platform used for the impression.Machined from Titanium Grade 5, the analog provides a...

Implant Lab Analog Compatible with MegaGen AnyOne® Implants is a Ø4.0 mm laboratory replica for transferring an implant-level impression into a conventional working cast. It gives technicians a defined reference for restorative position, orientation and connection engagement.The Titanium Grade 5 analog is intended for...

Implant Lab Analog Compatible with MegaGen AnyRidge® reproduces the 4.5 mm implant connection inside a conventional laboratory model. It provides technicians with an implant-level reference after the clinical position has been transferred by an impression component.The Titanium Grade 5 analog supports model pouring, crown...

Implant Lab Analog Compatible with MIS C1 and V3 transfers the chosen implant platform into a dental working model. The available C1WP, C1SP, C1NP and V3NP variants allow the laboratory to match the analog to the platform recorded in the clinical impression.Each Titanium Grade...

Implant Lab Analog Compatible with Neobiotech Implants recreates the selected implant connection inside a conventional working model. Mini and Regular options allow dental technicians to match the analog to the platform transferred from the clinical impression.Made from Titanium Grade 5, the analog serves as...

Implant Lab Analog Compatible with Neodent® GM reproduces the Ø4.5 mm implant connection in a conventional laboratory model. It is intended for technicians working from an implant-level impression when fabricating a crown, custom abutment or other GM restoration.The Titanium Grade 5 component is inspected...

Implant Lab Analog Compatible with Nobel® RP & NP Implants creates the implant reference inside a conventional working model. Separate RP and NP variants help the technician match the analog to the platform transferred by the impression coping.Made from Titanium Grade 5, the analog...

Implant Lab Analog Compatible with Osstem® TS / Hiossen® ET is an implant-level model component for crown and bridge fabrication. Choose Mini Ø3.5 mm or Regular Ø4.5 mm according to the connection transferred from the patient.The analog uses Titanium Grade 5 and undergoes two...

Implant Lab Analog Compatible with Straumann® Implant Systems provides a platform-specific replica for conventional laboratory models. Available options include RC, NC, RN, WN, SC, BLX RB and WB, allowing the analog to match the connection transferred from the clinical case.The Titanium Grade 5 component...

Implant Scan Body Compatible with ADIN® OS transfers implant position and orientation into an intraoral or desktop scan. Dentists and dental technicians can select Ø4.0 or Ø5.0 mm with GH3.0, GH5.0 or GH7.0 mm to suit the scanning space and tissue height.The Titanium Grade...

Implant Scan Body Compatible with DIO® UFII records the implant-level position and rotational orientation for digital restorative design. Its 4.5 mm connection is offered with Ø4.0 or Ø5.0 mm profiles and GH3.5, GH5.0 or GH7.0 mm.Produced from Titanium Grade 5, each scan body is...

Implant Scan Body Compatible with Neodent® GM transfers the implant position, orientation and connection into a digital impression. The Ø4.0 mm, GH7.0 mm configuration is intended for implant-level CAD/CAM workflows used by dentists and dental technicians.Connection geometry is inspected with precision measuring equipment, while...

Implant Temporary Abutment Compatible with ADIN® OS supports chairside or laboratory fabrication of an implant-level provisional crown. Dentists and technicians can use it during healing, tissue conditioning and restorative evaluation before the definitive prosthesis is completed.The Ø4.5 mm abutment is available in GH1.0, GH2.0,...

Implant Temporary Abutment Compatible with Straumann® RC/NC provides an implant-level base for provisional crowns and short-term restorations. RC Ø4.5 mm and NC Ø3.5 mm options are available in Hex and Non-Hex, each with H11.0 mm.The Titanium Grade 5 abutment supports clinical or laboratory provisionalization...

Implant-Level Scan Body Compatible with MIS C1 and V3 transfers implant position and orientation into an intraoral or laboratory scan. Available configurations are C1WP Ø5.0 mm plus C1SP, C1NP and V3NP at Ø4.0 mm, all with GH7.0 mm.The Titanium Grade 5 component supports CAD/CAM...

JD Care® Angled Abutment Compatible with JD Evolution® Implants redirects the restorative path when implant position does not align with the intended cement-retained crown. Choose 15° or 25° with GH1.5 or GH3.0 mm according to the clinical geometry.The Titanium Grade 5 abutment helps dentists...