MIS C1

Implant Lab Analog Compatible with MIS C1 and V3 transfers the chosen implant platform into a dental working model. The available C1WP, C1SP, C1NP and V3NP variants allow the laboratory to match the analog to the platform recorded in the clinical impression.Each Titanium Grade...

Digital Analog compatible with MIS C1 implants for reconstructing platform-specific implant positions in digitally printed working models.The available references cover V3NP, C1WP, C1SP and C1NP. This range allows technicians to match the analog to the connection recorded in the scan rather than adapting one...

Open Tray Impression Coping Compatible with MIS C1 transfers the implant position and orientation through an open-tray pick-up impression.Connection variants include C1WP, C1NP and C1SP. It is intended for dentists and laboratory teams handling bridge, single-unit or full-arch restorative workflows according to the selected...

Healing Cap Compatible with MIS C1 Implants for dentists covering the Ø4.8 mm multi-unit platform between clinical stages.The available selection is defined by Ø4.8 mm platform and Abutment-level protection. This allows the component to be chosen according to the implant platform, tissue level and...

MIS® C1 compatible straight abutment with transfer cap combines a straight restorative abutment with a plastic transfer component for transferring the selected abutment position into the working workflow.C1WP, C1NP and C1SP choices include GH1.0-4.0 mm and H6.0 or H8.0 mm configurations. The Titanium Grade...

Multi Closed Tray Impression Coping compatible with MIS C1 transfers the multi-unit restorative position into a conventional impression for downstream model fabrication. The available configuration is listed as IC-MIS-C1-EL48-C-N, allowing the clinic and laboratory to reference the exact Shopify variant.Produced from Titanium Grade 5...

MIS C1 Multi Open Tray Impression Coping transfers the multi-unit restorative position during an open-tray pick-up impression.Made from Titanium Grade 5, it is intended for dentists recording multi-unit bridge and full-arch cases. The coping remains captured in the impression when the guide pin is...

MIS C1 Multi Straight Abutment supports direct restorative pathways in C1NP, C1SP and C1WP configurations.C1NP and C1SP are listed in GH1.0-4.0 mm, while C1WP is available in GH1.0 and GH3.0 mm. These choices help dentists match connection and tissue height for screw-retained bridges and...

Multi Angled Abutment compatible with MIS C1 corrects implant divergence at the multi-unit level for screw-retained bridge and full-arch restorations. The range covers C1WP, C1SP and C1NP platforms with 17° or 30° angulation and listed GH1.0-3.0 mm options.Manufactured from Titanium Grade 5 within an...

Multi Lab Analog compatible with MIS C1 serves as the multi-unit platform reference in a physical working model. The available variant is identified as AOG-MIS-C148, allowing the clinic and laboratory to keep the component selection consistent throughout the restorative workflow.Manufactured from Titanium Grade 5...

Angled Abutment compatible with MIS C1 implants for single-unit restorations that require a more favorable crown insertion path without changing implant position.Options cover C1NP, C1SP, C1WP and V3NP connections, with 0°, 10° or 15° configurations and GH1.0–3.0 mm according to the selected platform. The...

Implant-Level Scan Body Compatible with MIS C1 and V3 transfers implant position and orientation into an intraoral or laboratory scan. Available configurations are C1WP Ø5.0 mm plus C1SP, C1NP and V3NP at Ø4.0 mm, all with GH7.0 mm.The Titanium Grade 5 component supports CAD/CAM...

Premill Blank Compatible with MIS C1 Implants provides a Titanium Grade 5 blank for CAD/CAM fabrication of customized implant abutments.Ø10.0 mm Hex variants include V3NP, C1WP, C1SP and C1NP. Dental laboratories should select the connection and blank diameter that match the planned restoration and...

MUA-Level Multi Scan Body compatible with MIS C1 transfers the position and orientation of the multi-unit restorative platform into an intraoral or laboratory scan. It is intended for dentists and dental technicians working on digital bridge or full-arch cases where the scan must reference...