Straumann

Implant Temporary Abutment Compatible with Straumann® RC/NC provides an implant-level base for provisional crowns and short-term restorations. RC Ø4.5 mm and NC Ø3.5 mm options are available in Hex and Non-Hex, each with H11.0 mm.The Titanium Grade 5 abutment supports clinical or laboratory provisionalization...

Healing Abutment Compatible with Straumann® RC for dentists developing the peri-implant tissue profile on RC connections.The available selection is defined by RC connection and Ø4.5–6.0 mm, GH2.0–6.0 mm. This allows the component to be chosen according to the implant platform, tissue level and restorative...

Implant Lab Analog Compatible with Straumann® Implant Systems provides a platform-specific replica for conventional laboratory models. Available options include RC, NC, RN, WN, SC, BLX RB and WB, allowing the analog to match the connection transferred from the clinical case.The Titanium Grade 5 component...

Straumann® BLX RB/WB compatible temporary abutment supports fabrication of provisional implant restorations while definitive prosthetics are being prepared.Diameter and gingival-height combinations range from Ø3.8 to Ø6.0 mm with GH1.5-3.5 mm. The machinable Titanium Grade 5 body is checked for connection seating and consistent geometry...

Straumann® RC/NC compatible straight abutment gives dentists and dental laboratories a fixed restorative platform when the implant axis permits a straight screw channel.Options span NC and RC connections in Ø3.5-6.5 mm with GH1.0-3.0 mm. Each Titanium Grade 5 component is inspected for connection fit...

Straumann® RC/NC compatible digital straight abutment supplies a straight machined interface for digitally designed single-unit restorations.Choose NC Ø4.0 mm or RC Ø4.5 mm; both variants have GH1.0 mm and H5.5 mm. Titanium Grade 5 construction and connection seating are verified under an ISO 13485...

Straumann® compatible digital analog reproduces the selected implant or multi-unit connection inside a 3D-printed model for CAD/CAM restorative verification.Listed codes cover RB/WB, RN, WN, NC, RC, SC and NC/RC multi-unit workflows. Each Titanium Grade 5 analog is checked for printed-model positioning and restorative connection...

Angled Abutment compatible with Straumann® RN, WN, RC and NC for clinicians selecting an implant-level component to improve crown or bridge alignment.The available coded configurations cover multiple platform families and restorative profiles, so selection should follow the exact RN, WN, RC or NC variant...

Straumann® RC compatible digital angled Ti Base helps dental laboratories redirect the restorative access path in CAD/CAM implant crown workflows.The RC configuration is Ø4.5 mm with GH1.1 mm and H4.0 mm. Its Titanium Grade 5 interface is inspected for connection seating and dimensional consistency...

Scan Body Compatible with Straumann Implants records the position, depth and rotational orientation of a single implant for digital restorative design.Listed component codes cover RB/WB, RC, RN and NC restorative connections. It supports intraoral and laboratory scanning for CAD/CAM workflows. The Titanium Grade 5...

Closed Tray Impression Coping compatible with Straumann® RC and NC for transferring implant position into a conventional impression and master model.The selection includes NC Ø3.3 mm and RC Ø4.1 mm, both at H12.3 mm. Clinicians select the platform before taking the impression, then reposition...

Straumann RC/NC Multi Temporary Abutment offers an H11 mm provisional base for NC Ø3.5 mm or RC Ø4.6 mm workflows.It supports chairside and laboratory fabrication of temporary screw-retained bridges and full-arch restorations at multi-unit level. Selecting the correct NC or RC variant keeps the...

Premill Blank Compatible with Straumann® Implants provides a Titanium Grade 5 blank for CAD/CAM fabrication of customized implant abutments.Ø10.0 mm Hex variants are listed for RC, NC, RB, WN, RN, SC and WB connections. Dental laboratories should select the connection and blank diameter that...

Straumann® BLX RB/WB Open Tray Impression Coping transfers implant position and orientation through an open-tray pick-up impression.The listed L24 mm length provides access for the corresponding clinical impression workflow. It is intended for dentists and laboratory teams reproducing the implant position in a working...

Multi Lab Analog compatible with Straumann RC/NC provides the multi-unit restorative reference inside a conventional working model. The listed RC/NC / Ø4.6 mm variant identifies both the supported platforms and model component size.Machined from Titanium Grade 5 under an ISO 13485 quality system, the...

Multi Ti Base Compatible with Straumann RC/NC provides NC Ø3.5 mm and RC Ø4.6 mm titanium interfaces for CAD/CAM frameworks. A compatible multi-unit screw option is also listed.It is intended for dentists and dental technicians assembling screw-retained multi-unit restorations. The Titanium Grade 5 component...

Multi Angled Abutment compatible with Straumann RC/NC provides angulation correction at the multi-unit level for screw-retained restorations. The variants cover RC-A Type and NC-A Type in 17° or 30°, with GH2.5, 4.0 and 5.5 mm choices.Each abutment is made from Titanium Grade 5 under...

Straumann RC/NC Multi Straight Abutment supports direct multi-unit restorations across the listed RC and NC configurations.Available variants combine Ø3.5 mm or Ø4.6 mm platforms with GH1.0, GH2.5 or GH4.0 mm selections. Dentists can choose the connection and tissue height for screw-retained bridges or full-arch...

Straumann Compatible Multi Unit Screw retains compatible prosthetic components or frameworks at the multi-unit restorative level.It is intended for dentists and dental technicians assembling screw-retained bridge and full-arch restorations. This Titanium Grade 5 component is inspected for thread form and driver engagement, with batch...

Straumann® BLX RB/WB compatible multi straight abutment creates a straight multi-unit restorative platform for screw-retained bridge and full-arch workflows.The Ø4.6 mm platform is offered in GH1.5-4.5 mm to position the restorative interface at the selected tissue height. Titanium Grade 5 construction, connection-fit inspection and...

BLX RB/WB Multi Angled Abutment compatible with Straumann® implants for redirecting screw access in full-arch and multi-unit restorations.The RB/WB connection is available in 17° and 30° angles, each with GH3.5, GH4.5 and GH5.5 mm options. This enables angle and cuff-height selection when tilted implants...

BLX RB/WB Closed Tray Impression Coping compatible with Straumann® implants for transferring implant position into a conventional closed-tray impression.The Ø4.5 mm, L13.0 mm coping remains connected during tray removal and is then repositioned into the impression before the laboratory pours the working model. This...

New Unused Straumann® BLT Dental Implant System is available in the listed BLT configurations for professional implant treatment planning.Variant codes cover 3.3, 4.1 and 4.8 mm platform families with the lengths shown in the product selector. Selection must be made by a qualified dental...