Osstem® TS / Hiossen® ET

Healing Abutment Compatible with Osstem® TS / Hiossen® ET for dentists tissue management across Mini and Regular implant connections.The available selection is defined by Mini and Regular connections and Ø4.0–7.0 mm, GH3.0–9.0 mm. This allows the component to be chosen according to the implant...

Osstem® TS / Hiossen® ET compatible Ti Base connects a laboratory-designed CAD/CAM restoration to the implant through a machined titanium interface.Mini Ø4.0 mm and Regular Ø4.5 mm versions are available in Hex or Non-Hex with GH1.0 or GH2.0 mm and H5.0 mm. Titanium Grade...

17°/30° Multi Angled Abutment compatible with Osstem® TS and Hiossen® ET for dentists and laboratories managing non-parallel implants in screw-retained bridge and full-arch restorations.Mini and Regular connections are available with an Ø4.8 mm restorative platform. The 17° range covers GH2.5–4.0 mm, while the 30°...

Scan Body Compatible with Osstem® TS / Hiossen® ET records implant position, depth and rotational orientation for digital restorative design.Mini and Regular variants combine Ø4.0 or Ø5.0 mm scan profiles with the listed gingival heights. It supports dentists and dental laboratories working with intraoral...

New Unused Osstem® TS Dental Implant System is listed in diameters from Ø3.5 to Ø5.0 mm and lengths from L8.5 to L13.0 mm.Configuration selection must follow the clinician’s treatment plan, patient anatomy and the relevant surgical protocol. Dentists should verify the intended diameter and...

Implant Lab Analog Compatible with Osstem® TS / Hiossen® ET is an implant-level model component for crown and bridge fabrication. Choose Mini Ø3.5 mm or Regular Ø4.5 mm according to the connection transferred from the patient.The analog uses Titanium Grade 5 and undergoes two...

Osstem® TS / Hiossen® ET Regular Straight Abutment provides a direct restorative pathway for favorably positioned implants.Available combinations include Ø4.5 and Ø5.0 mm profiles with H5.5 or H7.0 mm and the gingival heights shown in the variant selector. Dentists can match profile, component height...

Osstem® TS / Hiossen® ET compatible digital analog positions the selected implant or multi-unit connection inside a 3D-printed working model for CAD/CAM restoration checks.Choose MUA Ø4.8 mm, Mini Ø3.5 mm or Regular Ø4.5 mm according to the restorative platform. Titanium Grade 5 construction and...

Osstem® TS / Hiossen® ET Regular Angled Abutment redirects the restorative pathway where implant angulation requires correction.Variants combine Ø4.5, Ø5.0 or Ø6.0 mm profiles with GH2.0 or GH4.0 mm and A-side or B-side orientation. Dentists can select the profile, tissue height and orientation for...

Osstem® TS / Hiossen® ET Multi Ti Base is available in Short and Long versions for digital multi-unit restorations.Dental laboratories can select the component height for bonding CAD/CAM bridge and full-arch frameworks to the established restorative platform. The Titanium Grade 5 base provides a...

New Unused Hiossen® ET Dental Implant System offers clinician-selected diameters from Ø3.5 to Ø5.0 mm and lengths from L8.0 to L13.0 mm.Qualified dental professionals should choose the configuration according to the treatment plan, patient anatomy and applicable surgical protocol. Confirm diameter and length before...

Osstem® TS / Hiossen® ET compatible temporary abutment is a contourable foundation for provisional implant crowns and splinted temporary restorations.Mini and Regular platforms are offered in Hex or Non-Hex configurations with GH1.0 or GH3.0 mm. The Titanium Grade 5 body is inspected for restorative...

Mini Straight Abutment compatible with Osstem® TS / Hiossen® ET provides a straight hexed base for cement-retained single-unit crowns. The listed range includes Ø4.0 and Ø4.5 mm diameters, GH1.0-7.0 mm and H5.5 or H7.0 mm restorative heights, allowing selection by tissue depth and available...

Healing Cap Compatible with Osstem® TS / Hiossen® ET covers the Ø4.8 mm multi-unit restorative platform between treatment stages. It is intended for dentists managing provisional, healing or delayed-restoration workflows where the platform must remain protected and easy to locate.The Titanium Grade 5 cap...

Osstem® TS / Hiossen® ET Multi Temporary Abutment provides a non-hex provisional base in Mini or Regular configurations.Available variants include Mini Ø4.8 mm and Regular Ø4.0, Ø4.8 or Ø5.0 mm. Dentists and technicians can select the matching restorative platform for temporary screw-retained bridges and...

Locator Abutment Compatible with Osstem® TS / Hiossen® ET provides an attachment for removable implant overdentures. Mini and Regular Ø3.8 mm connections are available, with Mini GH1.0-6.0 mm and Regular GH1.0-9.0 mm options.The Titanium Grade 5 abutment is produced under an ISO 13485-certified quality...

Osstem® TS / Hiossen® ET compatible Geo Ti Base provides a shaped Titanium Grade 5 bonding interface for customized CAD/CAM implant restorations.Mini and Regular configurations span Ø4.0-4.6 mm, Hex and Non-Hex designs, and GH1.3-3.0 mm. Connection seating and bonding geometry are inspected under an...

Premill Blank Compatible with Osstem® TS / Hiossen® ET provides a Titanium Grade 5 blank for CAD/CAM fabrication of customized implant abutments.Hex and Non-Hex variants combine 3.5 or 4.5 mm connections with Ø10.0 or Ø14.0 mm blanks. Dental laboratories should select the connection and...

Osstem® TS / Hiossen® ET Multi Scan Body records the position and orientation of an Ø4.8 mm multi-unit restorative platform.It is intended for dentists and laboratories completing abutment-level scans for bridge and full-arch CAD/CAM design. The Titanium Grade 5 component is checked for connection...

Osstem® TS / Hiossen® ET Multi Unit Screw retains compatible prosthetic components or frameworks at the multi-unit restorative level.It is intended for dentists and dental technicians assembling screw-retained bridge and full-arch restorations. This Titanium Grade 5 component is inspected for thread form and driver...

Guide Sleeve compatible with Osstem® TS and Hiossen® ET for positioning guided-surgery drilling instruments within a surgical template.Available sleeve dimensions include Ø6.4 × Ø7.4, Ø6.0 × Ø7.0 and Ø7.3 × Ø8.3. The selected size should follow the corresponding guided-surgery kit and template design. Each...

Closed Tray Impression Coping compatible with Osstem® TS and Hiossen® ET for implant-level transfer impressions used in conventional laboratory models.Mini and Regular options cover Ø4.0–6.0 mm profiles in L11.0 mm and L14.0 mm. The coping stays connected when the tray is removed, then is...

Multi Lab Analog compatible with Osstem® TS / Hiossen® ET reproduces the multi-unit restorative platform in a physical working model. Choose the listed Ø4.8 mm or Ø5.0 mm variant according to the platform selected for the case.Produced from Titanium Grade 5 within an ISO...