CATEGORIES
CUSTOM CMS BLOCK
Analog
Implant analogs are used to accurately replicate the position and connection of the implant inside a laboratory model. Suitable for both traditional plaster models and 3D-printed models, they ensure precise implant transfer and stable prosthetic fabrication.
Implant analogs are used to accurately replicate the position and connection of the implant inside a laboratory model. Suitable for both traditional plaster models and 3D-printed models, they ensure precise implant transfer and stable prosthetic fabrication.
-
Vendor:Multi Lab Analog compatible with Straumann RC/NC provides the multi-unit restorative reference inside a conventional working model. The listed RC/NC / Ø4.6 mm variant identifies both the supported platforms and model component size.Machined from Titanium Grade 5 under an ISO 13485 quality system, the...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with Osstem® TS / Hiossen® ET reproduces the multi-unit restorative platform in a physical working model. Choose the listed Ø4.8 mm or Ø5.0 mm variant according to the platform selected for the case.Produced from Titanium Grade 5 within an ISO...Regular price $2.40 USDRegular priceUnit price per
-
Vendor:Implant Lab Analog Compatible with BioHorizons® Implants is a BH-30 laboratory component for reproducing an implant-level connection in a conventional working model. It gives technicians a fixed reference for designing and evaluating an implant-supported restoration outside the mouth.The analog is manufactured from Titanium Grade...Regular price $2.10 USDRegular priceUnit price per
-
Vendor:Digital Analog compatible with BioHorizons® implants for converting digital implant-position data into a physical connection inside a printed model.Available references include BH-35, BH-45 and BH-57, enabling the laboratory to match the analog to the recorded implant platform. The installed analog provides a repeatable interface...Regular price $3.50 USDRegular priceUnit price per
-
Vendor:Multi Digital Analog compatible with ADIN® OS reproduces the multi-unit restorative platform in a 3D-printed model for digital prosthetic fabrication. The listed Ø5.0 mm variant provides a defined reference for technicians designing screw-retained bridge and full-arch restorations.Manufactured from Titanium Grade 5 within an ISO...Regular price $3.50 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with MegaGen® Blue Diamond RC/NC recreates the Ø4.8 mm multi-unit restorative platform in a laboratory model. It gives dental technicians a stable reference for verifying framework fit, contact relationships and prosthetic seating in screw-retained bridge and full-arch cases.Machined from Titanium...Regular price $3.70 USDRegular priceUnit price per
-
Vendor:Implant Lab Analog Compatible with BEGO® Implants reproduces the implant position and connection in a conventional dental model. Four diameters—Ø3.75, Ø4.1, Ø4.5 and Ø5.5 mm—let technicians select the analog that corresponds to the recorded clinical platform.Machined from Titanium Grade 5, it serves as the...Regular price $3.70 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with BEGO® implants recreates the restorative platform inside a conventional working model. Its listed Ø5.1 mm size gives the dental laboratory a clear component reference for multi-unit framework fabrication and seating verification.Machined from Titanium Grade 5 under an ISO 13485...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with MegaGen AnyOne® transfers the multi-unit restorative position into a dental working model. Choose the listed Ø5.0 mm N-Type or Ø5.0 mm S-Type variant to match the platform used in the clinical case.Manufactured from Titanium Grade 5 within an ISO...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Digital Analog compatible with BB® implants for laboratories reproducing Mini or Regular implant connections in printed dental models.After scan data is used to design the model, the selected analog is inserted to establish the physical implant interface for restorative seating and contact checks. Mini...Regular price $3.50 USDRegular priceUnit price per
-
Vendor:Digital Analog compatible with Nobel® RP and NP for laboratories transferring scanned implant positions into physical 3D-printed models.Separate RP and NP choices preserve platform-specific connection geometry throughout the digital workflow. Once installed in the model, the analog provides the interface for restorative seating, proximal-contact...Regular price $3.50 USDRegular priceUnit price per
-
Vendor:Digital Analog compatible with Dentium implants for dental laboratories reproducing a single-implant connection in a digitally designed and printed model.The listed Ø5.5 mm profile provides the physical reference used to seat the restorative component after implant position has been captured digitally. This product is...Regular price $3.50 USDRegular priceUnit price per
-
Vendor:Implant Lab Analog Compatible with Dentium Implants reproduces the Regular Ø4.5 mm connection in a laboratory cast after implant-level impression transfer. It helps technicians preserve the recorded position and orientation while fabricating a crown, abutment or implant-supported bridge.Made from Titanium Grade 5, the analog...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with MIS C1 serves as the multi-unit platform reference in a physical working model. The available variant is identified as AOG-MIS-C148, allowing the clinic and laboratory to keep the component selection consistent throughout the restorative workflow.Manufactured from Titanium Grade 5...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Implant Lab Analog Compatible with Cortex Implants is a Ø3.75 mm model analog used by dental laboratories after an implant-level impression. Embedded in the working cast, it represents the clinical connection and gives the technician a reference for restorative orientation.The Titanium Grade 5 component...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Digital Analog compatible with Cortex implants for laboratories completing a digital-to-physical workflow with a 3D-printed working model.The CTX-AOG-3D reference creates the implant-level interface needed to seat and evaluate the planned restoration outside the mouth. It is intended to be selected from the matching scan...Regular price $3.50 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with Cortex implants reproduces the multi-unit restorative position in a dental working model. The available Shopify variant is identified as CTX-MUA-AOG, allowing the laboratory to reference the exact component during model assembly and framework verification.Manufactured from Titanium Grade 5 within...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Implant Lab Analog Compatible with DIO® UFII reproduces the implant-level connection in a conventional laboratory model. Dental technicians can select Mini Ø3.5 mm or Regular Ø4.5 mm to match the clinical platform used for the impression.Machined from Titanium Grade 5, the analog provides a...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with DIO® UFII provides a physical multi-unit platform reference inside a conventional working model. Its listed Ø4.8 mm variant supports bridge and full-arch laboratory workflows where framework alignment and seating must be evaluated.Produced from Titanium Grade 5 under an ISO...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Implant Lab Analog Compatible with Neobiotech Implants recreates the selected implant connection inside a conventional working model. Mini and Regular options allow dental technicians to match the analog to the platform transferred from the clinical impression.Made from Titanium Grade 5, the analog serves as...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with MegaGen AnyRidge® recreates the multi-unit restorative position in a conventional laboratory model. The available Shopify variant is DCB-MEG-MUA-AOG-AO/AR48, providing the exact component reference for model assembly and framework evaluation.Machined from Titanium Grade 5 under an ISO 13485 quality system,...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Digital Analog compatible with MegaGen AnyRidge for dental laboratories working with both implant-level and multi-unit printed models.The coded selection includes an AR45 implant-level reference and an AO/AR Ø4.8 mm multi-unit reference. Choosing the correct level ensures the printed model reproduces the interface captured during...Regular price $3.50 USDRegular priceUnit price per
-
Vendor:Implant Lab Analog Compatible with MegaGen AnyRidge® reproduces the 4.5 mm implant connection inside a conventional laboratory model. It provides technicians with an implant-level reference after the clinical position has been transferred by an impression component.The Titanium Grade 5 analog supports model pouring, crown...Regular price $2.70 USDRegular priceUnit price per
-
Vendor:Multi Lab Analog compatible with ADIN® OS reproduces the multi-unit restorative position in a conventional dental working model. Its listed Ø5.0 mm size provides technicians with a defined reference for framework fabrication and prosthetic seating checks.Produced from Titanium Grade 5 under an ISO 13485...Regular price $2.70 USDRegular priceUnit price per
